Bathroom Faucets How To Install. Put the new faucet in position, placing the appropriate valves into their matching holes. Danny, from The Home Depot, walks through the installation of a new sink faucet in just.
The water supply is usually found under the sink. Once the faucet is in the mounting holes, insert a washer over each tailpipe, and then twist on the nuts by hand. Use a basin wrench or a sink installer tool, being careful to not over-tighten the nuts.
Connect the P-trap to the pop-up and drain pipe.
From beneath the sink, tighten the mounting nuts to keep the faucet in place.
Hand-tighten it to the faucet valve over the acorn head. American Standard Bathroom Faucet Installation Guide. Start by turning off the water supply to the faucet.
Next, disconnect the supply lines from the faucet and disconnect the lift rod from the drain. Screw it into place on the drain rim. Screw them on, turning the knurled nuts clockwise. After the entire assembly is completed, connect the faucet handle to the valve. How to Install a Bathroom Faucet Share this page Share It's as easy as remembering red for hot, blue for cold.